User Manual

8 PowerFlex® DC Drive - Frame C Bimetal Thermostat
7. Remove the bolt (24 mm long) and washers that secure the L-shaped
bus bars to the top of each of the six internal Armature Circuit fuses.
Note the order of the washers on the bolt.
8. Remove the bolts (24mm long) and washers that secure the L-shaped
bus bars to each of the SCR modules and remove the bus bars. Note:
You do not need to remove the wires connected to the metal plate
secured with the L-shaped bus bar.
Remove bolt (24 mm long),
lock washer and flat washer
Bolt (24 mm long)
Lock washer
Flat washer
Fuse
Remove
24mm long
bolts and
washers
Leave wires
in place