User Manual

PowerFlex® DC Drive - Frame C Bimetal Thermostat 7

Remove the Bus Bars from a Regenerative Drive

6. Remove the six bolts and corresponding washers that secure the

intermediate bus bars to the U and W phase AC input and DC output

(terminals C and D) bus bars. Note the size and location of the bolts and

the order in which the washers are placed on the bolts.

Remove bolts

and washers

Remove bolts

and washers

Nut

Lock washer

Flat washer

Bolt (30mm long)

Flat washer

Lock washer

Nut

Left to right, two (2) bolts

(40mm long) and flat washers

Left to right, two

(2) nuts, lock

washers and flat

washers

Left to right, two (2)

flat washers, lock

washers and nuts

Bolt Size and Washer Order

Left to right, two (2)

flat washers and

bolts (40mm long)