User Manual

PowerFlex® DC Drive - Frame C Bimetal Thermostat 11
9. Remove the bolts and washers that secure the horizontal bus bars to the
C and D (vertical) power terminal bus bars. Note the size and location
of the bolts and the order in which the washers are placed on the bolts.
10. Remove the bolts and washers that secure the horizontal bus bars to the
SCR modules and remove the bus bars.
Continue with Remove the SCR Modules and Bimetal Thermostat on
page 12.
Remove bolts, lock washers, flat washers
Left to right, flat washers,
lock washers and nuts
Left to right, bolts and
flat washers
Bolt Size and Washer Order
Remove bolts and washers and bus bars