Manual

10 PowerFlex® DC Drive - Frame C AC Line Snubber Board and High Wattage Resistors
4. Remove the (orange and yellow) cables from connectors K1G1 and
K2G2 on the Pulse Transformer board (see Figure 1 on page 7
for
location).
5. Remove the cables from connectors XTM, X4 and X5 on the Pulse
Transformer board (see Figure 1 on page 7
for location).
6. Remove the cables from connectors XCD, XUVW and X3 on the Pulse
Transformer board (see Figure 1 on page 7
for location).
Remove cables
Remove cables