Manual

6 PowerFlex® DC Drive - Frame B Bimetal Thermostat
5. For Pulse Transformer boards with an armature voltage feedback
terminal block, FIR2-XX, rev. “N” and higher, remove the connector
from XCD_IO on the lower left corner of the board.
6. Carefully disconnect the cables from connectors XA, XR and XFCD at
the top of the Control board.
XCD_IO
C
XTA
XM
D
78 79 35 36 75 76 U2 V2
S3 S4
1
Remove connector from XCD_IO
Disconnect
cables