Instruction Manual

3-26 Programming and Parameters
COMMUNICATION
Masks & Owners
283 [Fault Clr Mask]
Controls which adapters can clear a fault.
See [Logic Mask]. 288 thru 297
284 [MOP Mask]
Controls which adapters can issue MOP commands to the drive.
See [Logic Mask]. 288 thru 297
285 [Local Mask]
Controls which adapters are allowed to take exclusive control of drive
logic commands (except stop). Exclusive “local” control can only be taken
while the drive is stopped.
See [Logic Mask]. 288 thru 297
288 [Stop Owner]
Adapters that are presently issuing a valid stop command.
Read Only 276 thru 285
289 [Start Owner]
Adapters that are presently issuing a valid start command.
See [Stop Owner]. 276 thru 285
290 [Jog Owner]
Adapters that are presently issuing a valid jog command.
See [Stop Owner]. 276 thru 285
291 [Direction Owner]
Adapter that currently has exclusive control of direction changes.
See [Stop Owner]. 276 thru 285
292 [Reference Owner]
Adapter that has the exclusive control of the command frequency source
selection.
See [Stop Owner]. 276 thru 285
293 [Accel Owner]
Adapter that has exclusive control of selecting [Accel Time 1, 2].
See [Stop Owner]. 140,
276
thru 285
294 [Decel Owner]
Adapter that has exclusive control of selecting [Decel Time 1, 2].
See [Stop Owner]. 142,
276
thru 285
295 [Fault Clr Owner]
Adapter that is presently clearing a fault.
See [Stop Owner]. 276 thru 285
296 [MOP Owner]
Adapters that are currently issuing increases or decreases in MOP
command frequency.
See [Stop Owner]. 276 thru 285
297 [Local Owner]
Adapter that has requested exclusive control of all drive logic functions. If
an adapter is in local lockout, all other functions (except stop) on all other
adapters are locked out and non-functional. Local control can only be
obtained when the drive is not running.
See [Stop Owner]. 276 thru 285
File Group No.
Parameter Name & Description
See page 3-2 for symbol descriptions
Values Related
000100xxxxxxxxxx
10 01234567891112131415
1 =Issuing Command
0 =No Command
x =Reserved
Bit #
Digital In
DPI Port 1
DPI Port 2
DPI Port 3
DPI Port 4
DPI Port 5