Instruction Manual

Programming and Parameters 3-23
UTILITY
Diagnostics
229 [Alarm 1 @ Fault]
Captures and displays [Drive Alarm 1] at the time of the last fault.
Read Only 211,
224
thru 230
230 [Alarm 2 @ Fault]
Captures and displays [Drive Alarm 2] at the time of the last fault.
Read Only 212,
224
thru 230
234
236
[Testpoint 1 Sel]
[Testpoint 2 Sel]
Selects the function whose value is displayed value in [Testpoint x Data].
These are internal values that are not accessible through parameters.
See Testpoint Codes and Functions
on page 4-10 for a listing of available
codes and functions.
Default:
Min/Max:
Units:
499
0/65535
1
235
237
[Testpoint 1 Data]
[Testpoint 2 Data]
The present value of the function selected in [Testpoint x Sel].
Default:
Min/Max:
Units:
Read Only
0/4294967295
1
Faults
238 [Fault Config 1]
Enables/disables annunciation of the listed faults.
240 [Fault Clear]
Resets a fault and clears the fault queue.
Default:
Options:
0
0
1
2
“Ready”
“Ready”
“Clear Faults”
“Clr Flt Que”
241 [Fault Clear Mode]
Enables/disables a fault reset (clear faults) attempt from any source. This
does not apply to fault codes which are cleared indirectly via other
actions.
Default:
Options:
1
0
1
“Enabled”
“Disabled”
“Enabled”
242 [Power Up Marker]
Elapsed hours since initial drive power up. This value will rollover to 0
after the drive has been powered on for more than the max value shown.
For relevance to most recent power up, see [Fault x Time].
Default:
Min/Max:
Units:
Read Only
0.0000/429496.7295 Hr
0.0001 Hr
244, 246,
248
, 250,
252
, 254,
256
, 258
File Group No.
Parameter Name & Description
See page 3-2 for symbol descriptions
Values Related
000000x0000xxxxx
10 01234567891112131415
1 =Condition True
0 =Condition False
x =Reserved
Bit #
Prechrg Actv
UnderVoltage
Power Loss
Str At PwrUp
Anlg in Loss
IntDBRes OH
Drv OL Lvl 1
Drv OL Lvl 2
Decel Inhibt
Waking
0000000000000xxx
10 01234567891112131415
1 =Condition True
0 =Condition False
x =Reserved
Bit #
DigIn CflctA
DigIn CflctB
DigIn CflctC
Bipolr Cflct
MtrTyp Cflct
NP Hz Cflct
MaxFrq Cflct
VHz NegSlope
IR Vlts Rang
FlxAmps Rang
SpdRef Cflct
Ixo Vlt Rang
Sleep Config
32
1x10001xxxxxxxxx
10 01234567891112131415
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
Power Loss
UnderVoltage
Motor OverLd
Shear Pin
AutRst Tries
Decel Inhibt
32