User Manual

3-18 Programming and Parameters
PowerFlex 700L Active Converter Power Module User Manual
Publication PFLEX-UM002D-EN-P
COMMUNICATION
DPI Status
325 [CS Msg Bad Cnt]
Displays a counter that increments on a bad Client Server message.
Default:
Min/Max:
Units:
Read Only
0/255
None
326 [PC Msg Rx Cnt]
Displays a counter that increments on a Producer Consumer message received.
Default:
Min/Max:
Units:
Read Only
0/65535
None
327 [PC Msg Tx Cnt]
Displays a counter that increments on a Producer Consumer message transmitted.
Default:
Min/Max:
Units:
Read Only
0/65535
None
328 [PC Timeout Cnt]
Displays a counter that increments on a Producer Consumer message time out.
Default:
Min/Max:
Units:
Read Only
0/255
None
329 [CAN Bus Off Cnt]
Displays a counter that increments on when the CAN Bus is turned off.
Default:
Min/Max:
Units:
Read Only
0/65535
None
Masks & Owners
(1)
340 [Logic Mask]
Determines which ports can control the drive when parameter 348 - [Write Mask Act] Bit 15
is set to “1.” If the bit for a port is set to “0,” the port will have no control functions except for stop.
The drive must be stopped to change this parameter.
341 [Start Mask]
Controls which adapters can issue start commands.
See [Logic Mask].
342 [Fault Clr Mask]
Controls which adapters can clear a fault.
See [Logic Mask].
343 [Stop Owner]
Displays adapters that are presently issuing a valid stop command.
344 [Start Owner]
Displays adapters that are presently issuing a valid start command.
See [Stop Owner].
345 [Fault Clr Owner]
Displays adapters that are presently clearing a fault.
See [Stop Owner].
Security
(1)
346 [Port Mask Act]
Bits 0-6 indicate status for DPI port communication.
Bit 15 indicates when security software is controlling the parameter.
File Group
No. Parameter Name & Description Values
Bit
Definition
DPI Port 6 DPI Port 5 DPI Port 4 DPI Port 3 DPI Port 2 DPI Port 1
Default xxxxxxxxx111111x
Bit 1514131211109876543210
0 = Control Masked
1 = Control Permitted
x = Reserved
Bit
Definition
DPI Port 6 DPI Port 5 DPI Port 4 DPI Port 3 DPI Port 2 DPI Port 1
Default xxxxxxxxx000000x
Bit 1514131211109876543210
0 = No Command
1 = Issuing Command
x = Reserved
Bit
Definition
Security DPI Port 6 DPI Port 5 DPI Port 4 DPI Port 3 DPI Port 2 DPI Port 1 Host
Default 0xxxxxxxx1111111
Bit 1514131211109876543210
0 = Not Active
1 = Active
x = Reserved
Read Only
Read Only