Instruction Manual

Rockwell Automation Publication 750-IN011E-EN-P - February 2014 7

PowerFlex 750-Series Power Jumpers

8…10 C

PE-A1 & PE-A2

connected to ground.

PE-B jumper plug

insulated/

disconnected from

ground.

PE-A1, PE-A2 and PE-

B connected to

ground.

Solid Ground

Connect the MOV jumper wire (PE-A1), Input Filter

Cap jumper plug (PE-A2) and the CM Cap jumper

plug (PE-B) to ground.

See page 4

for recommended torque.

Non-Solid Ground

Insulate/disconnect the MOV jumper wire (PE-A1), Input

Filter Cap jumper plug (PE-A2) and the CM Cap jumper plug

(PE-B) from ground.

Frame

Voltage

Code

Factory Default Jumper Settings

Power Source TypeCatalog Code “A” Catalog Code “J”

PE-A1

PE-A2

PE-A1

Insulated (P2)

Connected (P3)

Insulated

Connected

Insulated (J4)

Connected (J3)

PE-A1 and GND positions on

early production drives.

1.86 N•m (16.0 lb•in)

Insulated

Connected