Upgrade Kit (Frame 10-11)

10 PowerFlex® 700S and 700H Fan Inverter Upgrade Kit (Frame 10-11)
Step 6: Installing the
Inverter on the New Inverter
Assembly
Installation is reverse of removal. Refer to:Step 5: Removing the Inverter
from the Old Inverter Assembly on page -9.
Step 7: Installing the New
Inverter Assemblies and
Preparing the Drive for Use
Installation is reverse of removal. Refer to: Step 4: Removing Inverter
Assemblies on page -8, Step 3: Preparing Power Structure for Inverter
Assembly Removal on page -6 and Step 2: Removing Covers from the
Power Structure on page -3.
Contacting Rockwell
Automation Support
Before you contact Rockwell Automation for technical assistance, we
suggest you please review the troubleshooting information contained in the
supporting product publications first (e.g. publications PFLEX-TG002,
Hardware Service Manual - PowerFlex 700S and 700H Drives, and
PFLEX-IN006, Installation Instructions - PowerFlex 700S and 700H
Drives).
If the problem persists, call your local distributor or contact Rockwell
Automation in one of the following ways:
Be prepared to furnish the following information when you contact support:
• Product Catalog Number
• Product Serial Number
• Firmware Revision Level
Phone United States/
Canada
1.262.512.8176 (7 AM - 6 PM CST)
1.440.646.5800 (24 hour paid support available
through the TechConnect Support Program)
Outside United
States/Canada
You can access the phone number for your country via
the Internet:
Go to http://www.ab.com
Click on Support
(http://support.rockwellautomation.com/)
Under Contact Customer Support, click on Phone
Support
Internet
⇒
Go to http://www.ab.com/support/abdrives/
E-mail
⇒
[e-mail]