Owner's manual

HIM Overview D-3
Removing/Installing the HIM
The HIM can be removed or installed while the drive is powered.
Step Key(s) Example Displays
To remove the HIM...
1. Press ALT and then Enter (Remove). The
Remove HIM configuration screen appears.
2. Press Enter to confirm that you want to remove
the HIM.
3. Remove the HIM from the drive.
To install HIM...
1. Insert into drive or connect cable.
ALT
+
0.0
(Port 1 Control)
Remove Op Intrfc:
Disconnect Op Intfc?
Press Enter to