Owner's manual

Programming and Parameters 3-95
1317 User Data Real 03
General purpose parameter available for storage of real data by the operator. This value
will be retained through a power cycle.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
1318 User Data Real 04
General purpose parameter available for storage of real data by the operator. This value
will be retained through a power cycle.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
1319 User Data Real 05
General purpose parameter available for storage of real data by the operator. This value
will be retained through a power cycle.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
1320 User Data Real 06
General purpose parameter available for storage of real data by the operator. This value
will be retained through a power cycle.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
1370 Switch Control
Set bits to control the two software SPDT switches.
• Bit 1 [SW Int 1 On] controls the integer switch. Setting bit 1 moves the value from Par 1371 [SW Int 1 NO] into Par 1373 [SW Int 1 Output]. Resetting this bit moves
the value of Par 1372 [SW Int 1 NC] into Par 1373 [SW Int 1 Output].
• Bit 2 [SW Real 1 On] controls the real switch. Setting bit 2 moves the value from Par 1374 [SW Real 1 NO] into Par 1376 [SW Real 1 Output]. Resetting this bit
moves the value of Par 1375 [SW Real 1 NC] into Par 1376 [SW Real 1 Output].
1371 SW Int 1 NO
The integer switch moves the value of this parameter into Par 1373 [SW Int 1 Output]
when bit 0 [SW Int 1 On] of Par 1370 [Switch Control] is set.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
1372 SW Int 1 NC
The integer switch moves the value of this parameter into Par 1373 [SW Int 1 Output]
when bit 0 [SW Int 1 On] of Par 1370 [Switch Control] is reset.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
1373 SW Int 1 Output
Displays the output of the integer switch. It will reflect the value of either Par 1371 [SW Int
1 NO] or 1372 [SW Int 1 NC].
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
1374 SW Real 1 NO
The real switch moves the value of this parameter into Par 1376 [SW Real 1 Output] when
bit 0 [SW Int 1 On] of Par 1370 [Switch Control] is set.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
1375 SW Real 1 NC
The real switch moves the value of this parameter into Par 1376 [SW Real 1 Output] when
bit 0 [SW Int 1 On] of Par 1370 [Switch Control] is reset.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
1376 SW Real 1 Output
Displays the output of the real switch. It will reflect the value of either Parameter 1374 [SW
Real 1 NO] or 1375 [SW Real 1 NC].
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
No.
Name
Description Value
Linkable Read-Write Data Type
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved SW Real 1 On SW Int 1 On Reserved
Default0000000000000000
Bit 1514131211109876543210
0 = False
1 = True