Owner's manual

Programming and Parameters 3-69
No.
Name
Description Values
Linkable Read-Write Data Type
717 Data In C2 Int
Link C Word 2 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max:
0
-/[phone]
32-bit
Integer
718 Data In C2 Real
Link C Word 2 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
719 Data In D1 Int
Link D Word 1 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max:
0
-/[phone]
32-bit
Integer
720 Data In D1 Real
Link D Word 1 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
721 Data In D2 Int
Link D Word 2 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max:
0
-/[phone]
32-bit
Integer
722 Data In D2 Real
Link D Word 2 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max:
0.0000
-/+2200000000.0000
Real
723 DLink OutDataTyp
Set bits to configure each Datalink output word for real (floating point) data transfer. Reset bits to configure each Datalink output word for integer data transfer.
724 Data Out A1 Int
Link A Word 1 (Integer) - Parameter number whose value will be written to a
communications device data table.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
725 Data Out A1 Real
Link A Word 1 (Real or Floating Point) - Parameter number whose value will be written to
a communications device data table.
Default:
Min/Max:
0.0000
-/+2200000000.0000
✓✓Real
726 Data Out A2 Int
Link A Word 2 (Integer) - Parameter number whose value will be written to a
communications device data table.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
727 Data Out A2 Real
Link A Word 2 (Real or Floating Point) - Parameter number whose value will be written to
a communications device data table.
Default:
Min/Max:
0.0000
-/+2200000000.0000
✓✓Real
728 Data Out B1 Int
Link B Word 1 (Integer) - Parameter number whose value will be written to a
communications device data table.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
729 Data Out B1 Real
Link B Word 1 (Real or Floating Point) - Parameter number whose value will be written to
a communications device data table.
Default:
Min/Max:
0.0000
-/+2200000000.0000
✓✓Real
730 Data Out B2 Int
Link B Word 2 (Integer) - Parameter number whose value will be written to a
communications device data table.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
731 Data Out B2 Real
Link B Word 2 (Real or Floating Point) - Parameter number whose value will be written to
a communications device data table.
Default:
Min/Max:
0.0000
-/+2200000000.0000
✓✓Real
732 Data Out C1 Int
Link C Word 1 (Integer) - Parameter number whose value will be written to a
communications device data table.
Default:
Min/Max:
0
-/[phone]
✓✓32-bit
Integer
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved D2 Out Real D1 Out Real C2 Out Real C1 Out Real B2 Out Real B1 Out Real A2 Out Real A1 Out Real
Default0000000000000000
Bit 1514131211109876543210
0 = False
1 = True