Owner's manual

3-62 Programming and Parameters
550 MC Diag Status
Indicates the status of the MC diagnostic test.
551 MC Diag Done
Indicates which MC diagnostic tests are complete.
552 MC Diag Error 1
Displays the first diagnostic error encountered by the Motor Control (MC). Errors appear in this parameter in the order in which they occurred.
553 MC Diag Error 2
Displays the second diagnostic error encountered by the Motor Control (MC). Errors appear in this parameter in the order in which they occurred.
554 MC Diag Error 3
Displays the third diagnostic error encountered by the Motor Control (MC). Errors appear in this parameter in the order in which they occurred.
555 MC Status
Indicates status of the Motor Control (MC) Processor and related functions.
600 Integer In00
Displays input word 00 of the controller communication format in integer format. Paired
with Par 601 [Real In00], which displays the same data in floating point format.
Default:
Min/Max:
0
-/[phone]
32-bit
Integer
No.
Name
Description Values
Linkable Read-Write Data Type
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved PwrDiagFltPt PM EncOffset Rot Dir Chk CommCntEncls Comm Count CommParamCal CommLmEncles Comm Lm Meas Comm SigmaLs Comm Rs Meas PDgTrWP-VNOn PDgTrWP-UNOn PDgTrVP-WNOn PDgVP-UNOn PDgUP-WNOn PDgTrUP-VNOn PDgTrUNWNOn PDgTrUPWPOn Pdiag TrWNOn Pdiag TrVNOn Pdiag TrUNOn Pdiag TrWNOn Pdiag TrVPOn Pdiag TrUPOn Pdg VbusSens
Default00000000000000000000000000000000
Bit 313029282726252423222120191817161514131211109 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved PwrDiagFltPt PM EncOffset Rot Dir Chk CommCntEncls Comm Count CommParamCal CommLmEncles Comm Lm Meas Comm SigmaLs Comm Rs Meas PDgTrWP-VNOn PDgTrWP-UNOn PDgTrVP-WNOn PDgVP-UNOn UP-WNOn-U PDgTrUP-VNOn Ground Fault Ground Fault Pdiag TrWNOn Pdiag TrVNOn Pdiag TrUNOn Pdiag TWUNOn Pdiag TrVPOn Pdiag TrUPOn Pdg VbusSens
Default00000000000000000000000000000000
Bit 313029282726252423222120191817161514131211109 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Neg Parametr Not Rotating Not Rotating Reserved Reserved W,WP-VNOn-Wcur WP-UNOn-U,W VP-WNOn-Wcur VP-UNOn-Ucur UP-WNOn-U,W UP-VNOn-Ucur Ground Fault Ground Fault UP,VPdevShrt UP,WPdevShrt VP,WPdevShrt UN,VNdevShrt UN,WNdevShrt VN,WNdevShrt Vbus Range
Default00000000000000000000000000000000
Bit 313029282726252423222120191817161514131211109 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Negative Wr Reserved Reserved WP-VNOn-Vvw WPUN-Vuv,Vvw VP-WNOn-Vvw VP-UNOn-Vuv UPWN-Vuv,Vvw UP-VNOn-Vuv Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved SensOfstRnge
Default00000000000000000000000000000000
Bit 313029282726252423222120191817161514131211109 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Options
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved HP Fault HP Fault Reserved Reserved Reserved Reserved Vvw Volt Flt Vuv Volt Flt W Currnt Flt U Currnt Flt Reserved Ground Fault WNdeviceShrt VNdeviceShrt UNdeviceShrt WPdeviceShrt VPdeviceShrt UPdeviceShrt Vbus Range
Default00000000000000000000000000000000
Bit 313029282726252423222120191817161514131211109 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Options
Min Vqs MaxDCBus Vqs MaxMotor Vqs Max Vds Min Vds SrLssWsLimit Slip Limit Regen Iqs Limit FldWeakening Reserved Reserved Reserved Reserved FluxRatioRef Command Lim DC Bus Low MC Test Mode PreChrg Req PWM En PreChrg Done Flux En Tor qu e E n Change Dir MC CommisFlt MC CommisRun MC Fault MC Ready BaseBlockReq TorqueRunReq Flux Run Req MC En Req
Default00000000000000000000000000000000
Bit 313029282726252423222120191817161514131211109 8 7 6 5 4 3 2 1 0
0 = False
1 = True