Instruction Manual

PowerFlex® 700S and 700H Frame 12 DC Bus Connector Kit 9
Publication PFLEX-IN022A-EN-P
Step 4: Assemble the Left
Side Support Bracket
Identify the following parts:
• Rittal Mounting Rail (1)
• M8 Insulated Standoff (1 - smaller size) and hardware
Secure the M8 insulated standoff (smaller size) to the left side mounting rail, in
the position shown below, using the M8x12 bolt and flat and lock washer.
169 mm
(6.7 in.)
Note: the hooks on the ends of the
mounting rail must point down.