Instruction Manual

Publication PFLEX-IN022A-EN-P
6 PowerFlex® 700S and 700H Frame 12 DC Bus Connector Kit
Step 3: Assemble the New
Air Flow Restriction Plate
You will need the following parts:
• Air Flow Restriction Plate (1) and hardware
• Insulated Grommet (2) and hardware
• Support Bracket (1) and hardware
• M10 Insulated Standoff (1 - larger size) and hardware
1. Remove the two pre-scored rectangles on the air flow restriction plate.
Important:Remove any sharp edges from the openings in the sheet metal
plate.