User guide

Publication PFLEX-IN023A-EN-P
22
Remove the Rectifier Module from a Frame 11 Drive
The rectifier module(s) on frame 11 drives are contained in the V and W phase
power structure(s). 690V AC input 460A and 502A frame 11 drives only have
one rectifier module contained in the V phase power structure.
Note: Cut any cable ties securing control and power cables as necessary in order
to complete the following procedures. When re-assembling the drive
components, all control and power cables must be secured in the same manner
as they were prior to removal.
Important: Mark all connections and wires before removal to avoid incorrect
wiring during reassembly.
H LH LH L
Rectifier modules located on
sides of power structures
U Phase
V Phase
W Phase