Owner's manual

PowerFlex® 700S and 700H Frame 13 Replacement Power Structures 3

Step 2: Removing the Old

Power Structure

Before you can remove the old power structure from the drive, you must

remove the protective screens, protective covers and air flow plate from the

drive.

Removing the Protective Screens and Covers

1. For NEMA/UL Type 1 enclosures, remove the screws that secure the

protective screens to the enclosure and remove the screens.

2. Remove the four M5 POZIDRIV screws that secure each of the three

protective covers to the power structure and remove the protective

covers.

DC BUS CONDUCT

ORS AND CAPACITORS

OPERATE AT HIGH

VOLTAGE. REMO

VE POWER

AND W

AIT 5 MINUTES BEFORE SERVICING

DAN

GER

Three covers