Manual

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 91
Frame 11 Mechanical Installation Chapter 7
Remove the Airflow Plate
The drive is equipped with a plate, just above the control frame, that directs air
flow through the drive. You may need to remove this plate in order to access the
protective covers and the power terminals. If you do not need to remove the
airflow plate, continue with Remove the Protective Covers on page 92
.
Task Description
Remove the T8 Torx-head screws that secure the airflow plate to the drive.
Slide the airflow plate off of the drive.
A
B
A
B
A