Manual

90 Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013

Chapter 7 Frame 11 Mechanical Installation

Lifting and Mounting Frame

11 Drives

See the Lifting and Mounting PowerFlex 700S and 700H Drives, Frames 10…14,

Installation Instructions, publication PFLEX-IN005

, for detailed instructions.

These instructions are shipped with the drive. When you have completed the

instructions in PFLEX-IN005, continue with the installation as directed below.

Remove the Protective

Covers

Move the Control Frame

To gain access to the power wiring terminals, airflow plate and protective covers

you may need to move the control frame out of the way. If you do not need to

move the control frame, continue with Remove the Airflow Plate on page 91

Task Description

Loosen the T8 Torx-head screws that secure the control frame to the drive enclosure.

Swing the control frame out and away from the power structure.