Manual

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 145

Frame 14 Mechanical Installation Chapter 10

Remove the Protective Covers

You must remove the protective covers to gain access to the converter unit(s).

• Remove the four M5 POZIDRIV screws that secure each of the two or

three main and bottom protective covers to the drive, then remove the

protective covers.

DC BUS CONDUCTORS AND CAPACITORS

OPERATE AT HIGH VOLTAGE. REMOVE POWER

AND WAIT 5 MINUTES BEFORE SERVICING

DANGER

DC BUS CONDUCT

ORS AND CAPA

CITORS

OPERATE AT HIGH VOLTAGE. REMO

VE POWER

AND WAIT 5 MINUTES BEFORE SERVICING

DANGER

DC BUS CONDUCT

ORS AND CAPACITORS

OPERATE AT HIGH VOLTAGE. REMOVE POWER

AND WAIT 5 MINUTES BEFORE SER

VICING

DANGER

Remove screws and covers