Manual

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 129
Frame 13 Mechanical Installation Chapter 9
Remove the Protective Covers
You must remove the protective covers to gain access to the inverter units.
• Remove the four M5 POZIDRIV screws that secure each of the two or
three main and bottom protective covers to the drive, then remove the
protective covers.
DC BUS CONDUCTORS AND CAPACITORS
OPERATE AT HIGH VOLTAGE. REMOVE POWER
AND WAIT 5 MINUTES BEFORE SERVICING
DANGER
!
DC BUS CONDUCT
ORS AND CAPA
CITORS
OPERATE AT HIGH VOLTAGE. REMO
VE POWER
AND WAIT 5 MINUTES BEFORE SERVICING
DANGER
!
DC BUS CONDUCT
ORS AND CAPACITORS
OPERATE AT HIGH VOLTAGE. REMOVE POWER
AND WAIT 5 MINUTES BEFORE SER
VICING
DANGER
!
Remove screws and covers.
Remove screws and covers.