Manual

10 Rockwell Automation Publication PFLEX-IN027A-EN-P - July 2011
PowerFlex 700H and 700S AC Drives Frames 13 and 14 Main Fan Capacitor Replacement Kit
10. Secure the new fan capacitor to the bracket using the M12 hexagonal nut
and lock washer provided. Tightening torque is 5 N
•m (44.2 lb•in).
11. Connect the new fan capacitor wires to the connectors marked “Brown”
and “Blue.”
12. Secure the fan capacitor wires to the fan wire bundle using cable ties.
13. Complete the remaining installation in the reverse order of removal as
detailed in the previous steps for the Converter Unit.
IMPORTANT
Verify that no wire shields are touching the sheet metal
on the drive chassis.
Fan capacitor
Lock washer
Hexagonal nut