Installation Instructions - Frames 7…10 User Manual

12 Rockwell Automation Publication 20B-IN014H-EN-P - June 2013
PowerFlex 700 Adjustable Frequency AC Drive – Frames 7…10
Step 2: Lifting and Mounting
the Drive
Lifting
Frame 7
ATTENTION: To guard against possible personal injury and/or equipment
damage:
• Do Not allow any part of the drive or lifting mechanism to make contact with
electrically charged conductors or components.
• At no time should a person or their limbs be directly underneath the items
being lifted.
• Do not subject the load to high rates of acceleration or deceleration.
• Inspect all lifting hardware for proper attachment before lifting drive unit.
IMPORTANT
Braces attached to the front of Frame 8, 9 or 10 IP20, NEMA/UL Type 1 drives
are required for structural integrity. If necessary, the braces can be removed for
wiring, but must be replaced upon completion.
IP00, NEMA/UL Type Open
Approximate Weight 147 kg (324 lbs.) + 26 kg (58 lbs.) for shipping materials
IP20, NEMA/UL Type 1
Approximate Weight 170 kg (375 lbs.) + 26 kg (58 lbs.) for shipping materials
>
1
/
2 A
A
45°
Lifting Holes
4 Places