Owner manual

Rockwell Automation Publication 20D-UM007G-EN-P - March 2012 17
Installation and Wiring Chapter 2
PowerFlex 700S Frames 9…14
1. Remove the I/O Control Cassette from the drive.
Task Description
Open the door of the power structure and carefully disconnect the three cables
that connect to the main board.
Loosen the thumb screw that holds the metal flange in place.
Swing the flange and cassette away from the control frame.
Loosen the screws on the face of the cassette.
Remove the cassette.
A
B
C
D
E
B
A
Typical Frames 10…14
C
E
D