Manual
Table Of Contents
- PowerFlex 700H Adjustable Frequency AC Drive Programming Manual
- Summary of Changes
- Table of Contents
- Preface
- 1 - Drive Start-Up
- 2 - Programming and Parameters
- 3 - Troubleshooting
- Drive Status
- Faults and Alarms
- Manually Clear Faults
- Fault and Alarm Descriptions
- Fault Subcodes
- Clear Alarms
- Common Drive Symptoms and Corrective Actions
- Drive does not Start from Start or Run Inputs Wired to the Terminal Block
- Drive does not Start from HIM
- Drive does not Respond to Changes in Speed Command
- Motor and/or Drive will not Accelerate to Commanded Speed
- Motor Operation is Unstable
- Drive will not Reverse Motor Direction
- Stopping the Drive Results in a Decel Inhibit Fault
- Technical Support Options
- A - HIM Overview
- B - Application Notes
- C - History of Changes
- Index
- Back Cover
Rockwell Automation Publication 20C-PM001F-EN-P - March 2012 7
Preface
The purpose of this manual is to provide you with the basic information needed
to start-up, program and troubleshoot the PowerFlex 700H adjustable frequency
AC drive.
Who Should Use this Manual
This manual is intended for qualified personnel. You must be able to program
and operate Adjustable Frequency AC drives and related devices. In addition, you
must have an understanding of the parameter settings and functions.
What Is Not in this Manual
The PowerFlex 700H Programming Manual does not provide installation
instructions or maintenance and repair information.
For installation information, refer to:
• PowerFlex 700S/700H Adjustable Frequency AC Drives, Frames 9…14
Installation Instructions, publication PFLEX-IN006
.
• PowerFlex 700S/700H IP00 Open Power Structure, Frames 10…14
Installation Instructions, publication PFLEX-IN020
.
For maintenance and repair information, refer to:
• PowerFlex 700H and 700S Hardware Service Manual, Frame 9, PFLEX-
TG001
• PowerFlex 700H and 700S Hardware Service Manual, Frame 10, PFLEX-
TG002
• PowerFlex 700H and 700S Hardware Service Manual, Frame 11, PFLEX-
TG003
• PowerFlex 700H and 700S Hardware Service Manual, Frame 12, PFLEX-
TG004
• PowerFlex 700H and 700S Hardware Service Manual, Frame 13, PFLEX-
TG005
• PowerFlex 700H and 700S Hardware Service Manual, Frame 14, PFLEX-
TG006
For detailed drive application information refer to:
• PowerFlex Reference Manual, publication PFLEX-RM001
.
For information on… See page…
Who Should Use this Manual Below
What Is Not in this Manual Below
Additional Resources 8
General Precautions 8