Manual
Table Of Contents
- PowerFlex 700H Adjustable Frequency AC Drive Programming Manual
- Summary of Changes
- Table of Contents
- Preface
- 1 - Drive Start-Up
- 2 - Programming and Parameters
- 3 - Troubleshooting
- Drive Status
- Faults and Alarms
- Manually Clear Faults
- Fault and Alarm Descriptions
- Fault Subcodes
- Clear Alarms
- Common Drive Symptoms and Corrective Actions
- Drive does not Start from Start or Run Inputs Wired to the Terminal Block
- Drive does not Start from HIM
- Drive does not Respond to Changes in Speed Command
- Motor and/or Drive will not Accelerate to Commanded Speed
- Motor Operation is Unstable
- Drive will not Reverse Motor Direction
- Stopping the Drive Results in a Decel Inhibit Fault
- Technical Support Options
- A - HIM Overview
- B - Application Notes
- C - History of Changes
- Index
- Back Cover
Rockwell Automation Publication 20C-PM001F-EN-P - March 2012 61
Chapter 3
Troubleshooting
This chapter provides information to guide you in troubleshooting the
PowerFlex 700H drive. Included is a listing and description of drive faults and
alarms (with possible solutions, when applicable).
For Information on… See page…
Drive Status 62
Faults and Alarms 63
Manually Clear Faults 63
Fault and Alarm Descriptions 64
Fault Subcodes 71
Clear Alarms 77
Common Drive Symptoms and Corrective Actions 77
Technical Support Options 79