Owner manual

4 Rockwell Automation Publication 20B-IN028B-EN-P - August 2014
Replacing a Balancing Resistor on a PowerFlex 700 Drive, Frames 8, 9, and 10
Locating the Balancing Resistor on a Frame 8 PowerFlex 700 Drive
This illustration shows the location of the balancing resistor on a frame 8 AC
input drive. The location of the resistor is the same on a frame 8 DC input drive.
For more information about replacing components on frame 8 PowerFlex 700
drives, see PowerFlex 700 Drive - Frame 8 Components Replacement Installation
Instructions, publication 20B-IN024
.
Balancing Resistor