Owner manual

Rockwell Automation Publication 20B-IN026B-EN-P - July 2013 81

Converter Assembly Component Replacement Procedures Chapter 4

Snubber Boards

See Chapter 1 - Component Diagrams and Torque Specifications to locate the

component detailed in these instructions.

Remove Components

1. Read and follow the Safety Precautions on page 11 and Important Initial

Steps on page 12.

2. Remove safety shields and enclosure covers as needed.

3. Locate the Snubber Board(s) to be replaced.

4. Carefully label and disconnect the wires from Snubber Board(s) that will

be replaced.

5. Remove the DC1 terminal screw and mounting screw for the Snubber

Board(s) to be replaced.

6. Remove the Snubber Board(s) and properly discard.

DC1 Terminal Screw

Mounting Screw