Owner manual

Rockwell Automation Publication 20B-IN026B-EN-P - July 2013 33
Basic Component Removal Procedures Chapter 2
16. Reinstall the DC Choke output cables.
17. Reinstall any customer wiring to the Transitional Busbar assembly.
18. Reinstall the Stacking Panel as instructed on page 26
.
19. Reinstall the Main Control Panel as instructed on page 23
.
20. Verify all wiring to the two panels and the Transitional Busbar assembly
has been reconnected.
21. Replace all safety shields and enclosure covers before applying power to the
drive.