Owner manual

Rockwell Automation Publication 20B-IN026B-EN-P - July 2013 25
Basic Component Removal Procedures Chapter 2
6. Carefully label and disconnect the red and black wires from TB2 on the
DC Bus Filter Board.
Do not disconnect the wires from TB1.
7. Disconnect the black Thermal Sensor Wire from J6.
Do not remove the sensor from the bracket.
8. Carefully label and disconnect all wiring to TB9.
NOTE: TB9 shown with factory wiring only.
Connected Component Wire Color TB9 Terminal Notes
Capacitor Fan Harness Black 120V, right side Upper 120V slot
Black N, right side Upper N slot
Black PE, right side Lower PE slot