User guide

34 Rockwell Automation Publication 20A-IN009D-EN-P - June 2013
PowerFlex 70 Adjustable Frequency AC Drive
E
B
D
E
JP1/JP2
Installed
JP3/JP4
Not installed
Solid ground
Install jumpers at both locations (JP1/JP2 and JP3/JP4).
Non-solid ground
Remove the jumper at “JP1/JP2.” Verify that the jumper
at “JP3/JP4” is also removed.
C JP1/JP2
Installed
JP3/JP4
Installed
Frame Voltage Code
Factory Default Jumper Settings
Power Source TypeMOV/Input Filter Caps
DC Bus Common Mode
Caps
JP1 JP2
JP4
JP3
MOV /
Filter Cap
CM Cap