Owner's manual

Publication 2098-RM001C-EN-P – August 2002
Preface P-3
A copy of the DeviceNet Specification, Volumes I and II, Release 2.0
may be ordered from the web site http://www.odva.org of the
Open Device Vendor Association.
Conventions Used in this
Manual
The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural
steps
• Numbered lists provide sequential steps or hierarchical information
• Words you type or select appear in bold.
• When we refer you to another location, the section or chapter
name appears in italics
• Software commands and parameters are listed with initial capitals
and hardware signals are listed in all capitals (e.g., Enable Behavior
parameter, and ENABLE signal).
A glossary of industrial
automation terms and
abbreviations
Allen-Bradley Industrial
Automation Glossary
AG-7.1
How to commission a
DeviceNet system.
DeviceNet Cable System
Planning and Installation
Manual
DN-6.7.2
An overview of
Allen-Bradley motion
controls and systems
Motion Control Selection
Guide
GMC-SG001x-EN-P
For information about: Read this document: Publication Number