Design Guide Instruction Manual

4 Rockwell Automation Publication GMC-RM004C-EN-P - September 2013

Kinetix 300 and Kinetix 350 Drive Systems

Kinetix 300 and Kinetix 350 System Examples

These system examples illustrate how the required drive modules and accessories are used in a typical system.

Kinetix 300/350 System Example (Ethernet network)

Optional Drive Accessories

Kinetix 300/350 Input Power Accessories Example

Motor-end cable connector kits, for use when building your own cables, and panel-mounted breakout components are also

available. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004

, for detailed descriptions and

specifications of optional servo drive accessories.

Drive Accessory Description Cat. No.

2097 AC line filter

AC line conditioning for EMC

2097-Fx

2090 AC line filter

2090-XXLF-TCxxx

2090-XXLF-336

2097 Shunt resistor Panel-mount shunt resistor 2097-Rx

Memory module programmer Hand-held device for duplicating your Kinetix 300/350 drive configuration 2097-PGMR

Memory modules 12 pack Memory modules for Automatic Device Replacement (ADR) 2097-MEM

Connector set

Replacement connectors for AC input power (IPD), back-up power (CPD), shunt and

DC bus (BC), motor power (MP), and safe-off (STO).

2097-CONN1

External auxiliary encoder Allen-Bradley® sine/cosine and incremental external encoders Bulletin 842A, 844D, 845H, and 845T

2090-K2CK-xxxx

Low-profile Connector Kit for

Motor Feedback

Bulletin 2090 Motor Feedback Cable

Bulletin 2090 Motor Power Cable

2097-V3xxxx-xx

Kinetix 300/350 Drive

1585J-M8CBJM-x

Ethernet (shielded) Cable

2097-TB1

Terminal Expansion Block

for I/O Connections

Single-phase or Three-phase

Input Power

2097-Rx Shunt Resistor

(optional component)

Bulletin 2090 or 2097 AC Line Filter

Bulletin 2097 (side-mount) Filter is Shown

(required for CE)

2097-V3xxxx

Kinetix 300/350 Drive