Design Guide Instruction Manual

32 Rockwell Automation Publication GMC-RM004C-EN-P - September 2013
Kinetix 300 and Kinetix 350 Drive Systems
Kinetix 300 Drives with LDAT-Series Integrated Linear Thrusters
This section provides system combination information for the Kinetix 300 drives when matched with LDAT-Series
integrated linear thrusters. Included are motor power and feedback cable catalog numbers, system performance
specifications, and force/velocity curves.
LDAT-Series Cable Combinations
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor/Actuator Cables Overview beginning on page 5.
Motor-end connector kits, and panel-mounted breakout components (drive end), are available for motor power/brake and feedback cables. Refer to Optional Drive Accessories on page 4
.
Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004
, for standard cable lengths.
LDAT-Series (200 and 400V-class) Linear Thrusters Feedback Type Motor Feedback Cable
LDAT-Sxxxxxx-xDx Absolute high-resolution feedback
(1)
(1) Use low-profile connector kit (LDAT-CONKIT-ABS) with flying-lead cables on the drive end. Refer to Required Drive Accessories on page 3
2090-CFBM7DF-CEAAxx or
2090-CFBM7DD-CEAAxx (standard, non-flex)
2090-CFBM7DF-CEAFxx
2090-CFBM7DD-CEAFxx (continuous-flex)
LDAT-Sxxxxxx-xBx Incremental feedback
(2)
(2) Use low-profile connector kit (2090-K2CK-D15M) with flying-lead cables on the drive end. Refer to Required Drive Accessories on page 3.
2090-XXNFMF-Sxx (standard, non-flex)
2090-CFBM7DF-CDAFxx (continuous-flex)
LDAT-Series (200 and 400V-class) Linear Thrusters Motor Power Cable
LDAT-S031xxx-Dxx, LDAT-S032xxx-xxx, LDAT-S033xxx-xxx
2090-CPWM7DF-16AAxx (standard, non-flex)
2090-CPWM7DF-16AFxx (continuous-flex)
LDAT-S051xxx-Dxx, LDAT-S052xxx-xxx, LDAT-S053xxx-xxx, LDAT-S054xxx
LDAT-S072xxx-xxx, LDAT-S073xxx-xxx, LDAT-S074xxx-xxx, LDAT-S076xxx-Exx
LDAT-S102xxx-xxx, LDAT-S103xxx-xxx, LDAT-S104xxx-xxx, LDAT-S106xxx-Exx
LDAT-S152xxx-xxx, LDAT-S153xxx-xxx, LDAT-S154xxx-xxx, LDAT-S156xxx-Exx
LDAT-S076xxx-Dxx
2090-CPWM7DF-14AAxx (standard, non-flex)
2090-CPWM7DF-14AFxx (continuous-flex)
LDAT-S106xxx-Dxx
LDAT-S156xxx-Dxx