Design Guide Instruction Manual

Rockwell Automation Publication GMC-RM004C-EN-P - September 2013 19
Kinetix 300 and Kinetix 350 Drive Systems
Kinetix 300/350 (200V-class) Drives with MP-Series Food Grade Motors
This section provides system combination information for the Kinetix 300/350 (200V-class) drives when matched with
MP-Series food-grade motors. Included are motor power/brake and feedback cable catalog numbers, system performance
specifications, and the optimum torque/speed curves.
Bulletin MPF Motor Cable Combinations
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor/Actuator Cables Overview beginning on page 5.
Motor-end connector kits, and panel-mounted breakout components (drive end), are available for motor power/brake and feedback cables. Refer to Optional Drive Accessories on page 4
.
Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004
, for standard cable lengths.
Bulletin MPF Motor Performance Specifications with Kinetix 300/350 (200V-class) Drives
Performance Specifications with Kinetix 300/350 (200V-class, single-phase) Drives
Performance specification data and curves reflect nominal system performance of a typical system with motor at 40 °C (104 °F) and drive at 40 °C (104 °F) ambient, and rated line voltage. For additional
information on ambient and line conditions, refer to Motion Analyzer software.
Performance Specifications with Kinetix 300/350 (200V-class, three-phase) Drives
Performance specification data and curves reflect nominal system performance of a typical system with motor at 40 °C (104 °F) and drive at 40 °C (104 °F) ambient, and rated line voltage. For additional
information on ambient and line conditions, refer to Motion Analyzer software.
Motor Cat. No. (200V-class) Motor Power Cable Motor Feedback Cable
(1)
(1) Use low-profile connector kit (catalog number 2090-K2CK-D15M) with flying-lead cables on the drive end. Refer to Required Drive Accessories on page 3.
MPF-A310P, MPF-A320H, MPF-A320P, MPF-A330P
2090-CPxM7DF-16AAxx (standard, non-flex)
2090-CPxM7DF-16AFxx (continuous-flex)
2090-CFBM7DF-CEAAxx or
2090-CFBM7DD-CEAAxx (standard, non-flex)
2090-CFBM7DF-CEAFxx or
2090-CFBM7DD-CEAFxx (continuous-flex)
Absolute High-resolution Feedback
MPF-A430H
Rotary Motor
Speed, max
rpm
System Continuous
Stall Current
A 0-pk
System Continuous
Stall Torque
N•m (lb•in)
System Peak
Stall Current
A 0-pk
System Peak
Stall Torque
N•m (lb•in)
Motor Rated Output
kW
Kinetix 300/350
200V-class
Single-phase Drives
MPF-A310P 5000 4.85 1.58 (14) 14 3.61 (32) 0.73
2097-V33PR3-xx
2097-V32PR2-xx
2097-V31PR2-xx
MPF-A320H 3500 6.1 3.05 (27) 19.3 7.91 (70) 1.0
2097-V33PR5-xx
2097-V32PR4-xx
MPF-A320P 5000 9.0 3.05 (27) 29.5 7.91 (70) 1.3
Rotary Motor
Speed, max
rpm
System Continuous
Stall Current
A 0-pk
System Continuous
Stall Torque
N•m (lb•in)
System Peak
Stall Current
A 0-pk
System Peak
Stall Torque
N•m (lb•in)
Motor Rated Output
kW
Kinetix 300/350
200V-class
Three-phase Drives
MPF-A310P 5000 4.85 1.58 (14) 14 3.61 (32) 0.73 2097-V33PR3-xx
MPF-A320H 3500 6.1 3.05 (27) 19.3 7.91 (70) 1.0 2097-V33PR5-xx
MPF-A320P 5000 9.0 3.05 (27) 29.5 7.91 (70) 1.3 2097-V33PR3-xx
MPF-A330P 5000 12.0 4.18 (37) 38 11.1 (98) 1.6 2097-V33PR6-xx
MPF-A430H 3500 12.2 6.21 (55) 45 19.8 (175) 1.8 2097-V33PR6-xx