Installation Instructions Instruction Manual

Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules 13
Rockwell Automation Publication 2094-IN011D-EN-P - August 2013
AM Power Module Features and Indicators
IAM/AM Module Connectors
ATTENTION : To avoid damage to equipment, do not mount your Bulletin 2094 control
module to the power module when the Power-applied indicator is on. Remove all input
power from the IAM power module before mounting the control module.
Designator Description Connector Module
CPD Control input power (drive) 2-position plug/header IAM
IPD VAC input power (drive) and DC bus 6-position plug/header IAM
CED Contactor enable 2-position plug/header IAM
MP Motor power 4-position plug/header IAM/AM
BC Motor/resistive brake 6-position plug/header IAM/AM
1
2
3
W
V
U
MBRK -
MBRK +
COM
PWR
DBRK -
DBRK +
1 2 3 4
1 2 3 4 5 6
5
4
Item Description
1 Motor cable shield clamp
2 Motor power (MP) connector
3 Motor/resistive brake (BC) connector
4Power-applied indicator
5 Mounting screw
AM Power Module, Top View
(2094-BMP5-M is shown)
AM Power Module, Front View
(2094-BMP5-M is shown)