User Manual Owner manual

Publication 2093-UM001A-EN-P — January 2007
98 Connecting the Kinetix 2000 Drive System
Shunt Module Connections
Follow these guidelines when wiring your shunt.
Shunt Module Wiring
Shunt Module Jumper Settings
(1)
These jumpers are factory installed.
With this shunt module Cat. No. Do this
Power rail mounted shunt
module.
2093-ASP06
• Verify the internal shunt jumper is in place between RC-2 and RC-3, as shown in the figure below.
• Verify the thermal switch jumper is in place between TS-1 and TS-2, as shown in the figure below.
321
21
DC+
INT
COL
TS1
TS2
Shunt Module, Front View
(2093-ASP06)
Jumpers
DC+
INT
COL
TS1
TS2
321
21
External Shunt Resistor
(RC) Connector
Shunt Module, Front View
(2093-ASP06)
External Thermal Switch
(TS) Connector