User Manual Owner manual

Publication 2093-UM001A-EN-P — January 2007
86 Connecting the Kinetix 2000 Drive System
Motor Power Cables with Three-phase Wires Only
These cables only contain the three-phase wires and the motors have a
separate connector for brake connections. Thermal switch wires are included
in the feedback cable.
Motor Power Termination (three-phase wires only)
Motor Power Cables with Three-phase and Brake Wires
Motor Motor Catalog Number
Motor Power Cable
Catalog Number
MP-Series Low Inertia MPL-A3xxx, MPL-A4xxx, MPL-A45xxx
2090-XXNPMP-xxSxx
MP-Series Integrated Gear MPG-AxxxxS/M
TL-Series TL-Axxxx-H 2090-XXNPT-16Sxx
IMPORTANT
No drive-end preparation is required for these cables.
Motor Motor Catalog Number
Motor Power Cable
Catalog Number
MP-Series Low Inertia MPL-A15xxx and MPL-A2xxx V/E
2090-XXNPMF-xxSxx
MP-Series Food Grade MPF-AxxxxS/M
MP-Series Stainless Steel MPS-AxxxxS/M
MPAI Linear Actuator MPF-AxxxxS/M
TL-Series TL-Axxxx 2090-XXNPT-16Sxx
Y-Series Y-xxxx 2090-XXNPY-16Sxx
K2k Two-Axis System
(2093-PRS2, 2093-AC05-MP x , and 2093-AMP x shown)
Cable Clamp
(with tie wrap)
Motor Power (MP)
Connector Plug
Cable Clamp
(with tie wrap)