User Manual Owner manual

Publication 2093-UM001A-EN-P — January 2007
Connecting the Kinetix 2000 Drive System 79
Wiring the Control Power Output (CPL) Connector
Line Interface Module (CPL connector)
Control Power Output (CPL) Connector
2094-ALxxS, 2094-XL75S-Cx
Wiring the Auxiliary Power Output (P2L) Connector
Line Interface Module (P2L connector)
L3
L2
L1
1 2 3 4
Line Interface Module, Top View
(2094-XL75S-Cx is shown)
CPL Pin Signal
Recommended
Wire Size
mm
2
(AWG)
Strip Length
mm (in.)
Torque Value
Nm (lb-in.)
1CTRL 1
0.2...4.0 (24...10) 7.0 (0.28) 0.5... 0.6 (4.4... 5.3)
2CTRL 2
AUX2_L2
AUX2_L1
AUX1_L2
AUX1_L1
1 2 3 4
Line Interface Module, Top View
(2094-XL75S-Cx is shown)