User Manual Owner manual

Publication 2093-UM001A-EN-P — March 2007
DC Common Bus Applications 215
6. Select the Value Edit tab and enter the Add Bus Cap Value (μF).
7. Click OK, and verify the correct Add Bus Cap value is displayed in the
Node, Port, Axis hierarchy.
Save the Add Bus Cap Parameter to Non-volatile Memory
Follow these steps to save the Add Bus Cap parameter to non-volatile
memory.
1. From the menu bar choose Actions\Non-volatile Memory.
The following message dialog opens.
2. Click Save.
The changes are saved to non-volatile memory and the following
cautionary message dialog opens.
3. Click Yes.
The save to non-volatile memory is complete and the following
confirmation message dialog opens.
4. Click OK.
5. Close the DriveExplorer software.