User Manual Owner manual

Publication 2093-UM001A-EN-P — March 2007
202 Upgrading Firmware
Using Hyperterminal to
FLASH the Kinetix 2000
Drive
This section provides instructions on how to perform a HyperTerminal
session. Typically Hyperterminal is located in the directory path
Programs\Accessories\Communications\Hyperterminal.
1. Start Hyperterminal.
2. A new dialog opens.
3. Type a new Hypterminal name and choose the first icon for the
connection.
4. Select OK, and the following dialog opens.