User Manual Owner manual

Publication 2093-UM001A-EN-P — March 2007
Upgrading Firmware 189
5. Open the DriveExplorer software.
6. Select Connect and Configure Communications from the Explore menu
to configure the communication between your computer,
DriveExplorer, and the 1203-SSS SCANport. The diagram shows the
appropriate settings.
7. When communication is established, DriveExplorer displays the
following message, and then begins to map your Kinetix 2000 system.
8. Successful uploading of your Kinetix 2000 system parameters results in
a Kinetix 2000 system display.