User Manual Owner manual

Publication 2093-UM001A-EN-P — March 2007
Configure and Startup the Kinetix 2000 Drive System 115
8. Select the Associated Axes tab.
9. Click the New Axis button.
The New Tag dialog opens.
10. Add the axis.
1. Name the axis.
2. Select AXIS_SERVO_DRIVE as the data type.
11. Click OK.
The axis appears under the Ungrouped Axes folder in the Controller
Organizer software dialog.
12. Assign your axis to the node addresses (as shown in the dialog below).
13. Repeat steps 9…11 to create an auxiliary axis (for Node x + 128).