User Manual Owner manual

Publication 2093-UM001A-EN-P — March 2007
Configure and Startup the Kinetix 2000 Drive System 111
The Select Module dialog opens.
2. Expand the Motion category and select 1756-MxxSE, 1756-L60M03SE,
1768-M04SE, or 1784-PM16SE as appropriate for your actual hardware
configuration.
3. Click OK.
The Module Properties dialog opens. Your module appears under the
General tab in the DriveExplorer software dialog.
4. Configure the new module in the General tab display.
a. Name the module.
b. Select the slot where your module resides (leftmost slot = 0).
c. Select an Electronic Keying option (select Disable Keying if unsure).
5. Click OK.