User Manual Owner manual

Publication 2093-UM001A-EN-P — March 2007
110 Configure and Startup the Kinetix 2000 Drive System
4. Click OK.
5. From the Edit menu, choose Controller Properties.
The Controller Properties dialog opens.
6. Select the Date and Time tab.
7. Select the checkbox Make this controller the Coordinated System Time
master.
8. Click Apply, and then click OK.
Configure the SERCOS Interface Module
Follow these steps to configure the SERCOS interface module.
1. Right-click I/O Configuration in the DriveExplorer software dialog and
select New Module.
IMPORTANT
Only one ControlLogix processor can be assigned as the
Coordinated System Time master.