Owner's manual

Publication 2098-IN005C-EN-P — March 2008
20 Commissioning Your Ultra3000 Drive
Faults Branch
Use the Faults Branch to:
• set fault limits.
• monitor fault status.
• execute the Clear Faults command.
• open a dialog where you can review the drive's fault history.
• enable or disable faults.
Service Information Branch
Use the Service Information Branch to:
• modify the size of an off-line drive file before transferring the
configuration to an online drive.
• display and monitor service information about the drive.
• display the firmware version of the drive.
TIP
For more information on setting fault limits, refer to
Appendix C, Minimizing the Effects of Feedback Signal Loss on
page 141.