Getting Started with PanelView Plus Manual

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 31
Create a PanelView Plus Project Chapter 2
6. For examples of how to assign
the various tags to your
momentary push button object,
see the following sections below.
To configure the button to
increment the value of a counter
variable (CV), see
Assign a Key
Press Tag to the Push Button on
page 32.
To configure the button to reset
the counter variables (CV), see
Assign a Reset Tag to the Push
Button on page 33.
To configure the button to copy
the value of the counter variables
(CV) to the project variables
(PV), see
Assign a Copy CV_PV Tag
to the Push Button on page 35.
To assign a tag of an array
variable, see
When Using Array
Variables on page 59 for
instructions.