Getting Started with PanelView Plus Manual

16 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 2 Create a PanelView Plus Project
1. For this example, we will create a
new application.
For the Application name, type
in "Micro800_PVP".
Click Create to continue.
2. In the project explorer window,
right-click on Communication
Setup and select Open.
3. In the Configuration Wizard
dialog box, select Create a new
configuration and click Finish.
4. Under the Device Shortcuts
window, click Add to create a
new shortcut.