User Manual Owner manual

66 Rockwell Automation Publication 2080-UM005A-EN-E - December 2013

Chapter 8 Using the Micro800 Remote LCD

After showing the startup message, the Remote LCD will show the I/O Status

screen, assuming that no LCD_REM instructions are executing.

Navigate the Remote LCD

In text display mode, you can make use of available navigation keys (function

keys, arrow keys, ESC and OK) to navigate through the menus.

The module has twelve keys with the following operations.

Shortcut keys jump from the I/O Status screen to the specific main menu

operation.

Main Menu

To access the Main Menu and available submenus, press F4 and F6

simultaneously. To exit the Main Menu, press ESC.

Function Keys Operation

Button Function

Arrow keys (cursor buttons) Move cursor

Select menu item

Increment/Decrement Number

Choose numbers, values, times, and so on

OK Next menu level, store your entry

Esc Previous menu level, cancel your entry.

F1 Variable (Shortcut)

F2 ENET Cfg (Shortcut)

F3 Mode Switch (Shortcut)

F4 Fault Mode (Shortcut)

F5 Security (Shortcut)

F6 Backlight (Shortcut)

ESC

F1 F2